Part # : BWT71512 - Quick Pitch® Float Stick System

The Mark E. Industries® Quick Pitch® Float Stick System permits easy construction of shower floors with the proper minimum water drainage slope of 1/4" (6.4 mm) per 12" (305 mm) run. With this time-saving system there is now no chance for an error in measurement, or the need for a level, to achieve a properly sloped shower floor. The Quick Pitch Float Stick System uses a Center Ring and tapered Float Sticks to assure the correct drainage slope in standard or custom shower areas with walls up to 6" in any direction from the floor drain. This system does not add to the pan liner preslope as the Center Ring sits on top of the drain flange bolts. Choose the Quick Pitch® Standard Kit, Quick Pitch® Center Ring, Quick Pitch® Standard Float Sticks, or Quick Pitch® Extended Float Sticks. These products are Made in the USA with Global Materials.

• Quick Pitch® Standard Kit (BWT71512): permits construction of standard 36" x 60" shower areas with a centered drain or custom shower areas where the drain is within 36" of each wall; included is one Center Ring and 6 Standard Float Sticks
• Quick Pitch® Center Ring (71525): used with the Quick Pitch® Kit to create perfect slope in the shower floor before tiling; standard float sticks fit into the Center Ring; 3-5/8" (92 mm) inside diameter and 1" (25 mm) thick
• Quick Pitch® Standard Float Sticks (BWT71513): measure 1" to 1-3/4" taper (25 mm to 45 mm) x 36" (914 mm) long. Includes 4 float sticks.
• Quick Pitch® Extended Float Sticks (BWT71514): measure 1-3/4" to 2-1/2" taper (45 mm to 64 mm) x 36" (914 mm) long. Includes 4 float sticks.
• Made in the USA with Global Materials