Skip to main content
$221.07

Valley Insert Assembly

$221.07
Spin Screed’s® Valley Insert Assembly can be installed in any Spin Screed® pipe on the Dead End to prepare concrete that’s lower in the center than it is on the sides, which allows water to run down the middle of your pour directly into storm drains. You can also use this tool in conjunction with our Heavy Duty Support Chairs to create slabs up to 40’ wide with various amounts of swales. This product is made in the USA with Global Materials.
  • Helps you create a “valley” in the middle of your pour for central water drainage
  • Use in conjunction with the Spin Screed® Heavy Duty Support Chair System for slabs up to 40’
  • Dimensions: 12” x 6” x 6”
  • Weight: 6 lbs.
  • Made in the USA with Global Materials
Item ID: 28731
Part #: SPNVIA
$221.07
Spin Screed’s® Valley Insert Assembly can be installed in any Spin Screed® pipe on the Dead End to prepare concrete that’s lower in the center than it is on the sides, which allows water to run down the middle of your pour directly into storm drains. You can also use this tool in conjunction with our Heavy Duty Support Chairs to create slabs up to 40’ wide with various amounts of swales. This product is made in the USA with Global Materials.
  • Helps you create a “valley” in the middle of your pour for central water drainage
  • Use in conjunction with the Spin Screed® Heavy Duty Support Chair System for slabs up to 40’
  • Dimensions: 12” x 6” x 6”
  • Weight: 6 lbs.
  • Made in the USA with Global Materials


Specifications

Item I​D 2​8​7​3​1​

Shipping Weight
6.00 lbs
Shipping Length
12.00 in.
Shipping Width
6.00 in.
Shipping Height
6.00 in.
Inner Pack Quantity
1 pieces
Outer Pack Quantity
1 pieces
Can Ship Small Package
YES
UPC
035965287319

Product Literature